OK..At this point here is what I suggest.
I know zilch about the ignition differences in the B3 vs B6 switch.
However I assume the basics of what components control what activity are probably the same.
Do you have a Festiva Service Manual?
Mine is a 1993 Service manual and Section 03-07 is Engine Ignition.
It tells you all about the the components and how they interact to get
a spark to the plug at the right time.
I just read this entire section.
Bottom line is that one or more of the components in this system is bad or is not connected correctly. The ICM and PCM are apparently very sensitive to static electric charges and if not handled according to procedure can be easily made useless.
Wish I could be of more help but, I'm afraid I've run out of suggestions.
I know zilch about the ignition differences in the B3 vs B6 switch.
However I assume the basics of what components control what activity are probably the same.
Do you have a Festiva Service Manual?
Mine is a 1993 Service manual and Section 03-07 is Engine Ignition.
It tells you all about the the components and how they interact to get
a spark to the plug at the right time.
I just read this entire section.
Bottom line is that one or more of the components in this system is bad or is not connected correctly. The ICM and PCM are apparently very sensitive to static electric charges and if not handled according to procedure can be easily made useless.
Wish I could be of more help but, I'm afraid I've run out of suggestions.
Comment