My KLZE Festiva Build Thread

[FestYboy]

^ for those who aren't so electro/mechanicaly inclined, these would not be a good choice. especially if they can't perform their own inspections (ah-hemm)...

[FestYboy]

both of two tail light had been red by th owner

stock models are some thing like this

well that fixes everything then!!! perfect.

[navid_2nh]

i found a stock pic

[Damkid]

^ for those who aren't so electro/mechanicaly inclined, these would not be a good choice. especially if they can't perform their own inspections (ah-hemm)...

In Ontario, cars only need to be saftied/inspected when they are first licensed, after that, there is no inspections, unless your insurance company asks for one

But I have a friend who is a licensed mechanic, my cars never have a problem passing safety

[Damkid]

i found a stock pic

That might be style I'm thinking of, the ones I remember looked a bit darker then that one though, like they were "smoked" on the inside

Can you get these style taillights?

[navid_2nh]

yes they are availabe!

there was another model that chrome parts were black.now there aren't available so guys buy these then paint the chrome parts(right) or put a black talc stickers on it(left)

[91blufestiva]

This is the one you are thinking of Chris, I used to want this set like crazy haha.



I saved a pic way back when lol

[Christ]

Several states have bi-annual or even one-time inspections. I think GA does the one-time thing, or at least used to... and it was done when the vehicle was registered, IIRC.

I have a family member that "inspects" my vehicles.

[Damkid]

More progress

It's tight but everything fits



Got the rad fitted, I had to trim my upper rad support to accommodate the thicker rad pipe, which raised my rad height as well



So I hooked up the wiring accords the engine and put the front end back on it



Now I just need to connect the exhaust underneath, then I can put the intake on (I'm leaving it off in case the downpipe needs to come out for welding) and then the mechanical stuff should be finished, finally lol

[Christ]

Damn, kid! (LOL)

That's looking tight. Literally.

[91mcnasty]

What he said

[sasquatch]

what size down pipe do you have?

[Damkid]

^^2-1/2"

[Nerd Racing]

how is the MS coming along?

[Damkid]

Still haven't touched it, I'm really unsure if I'll get it working or not..... Just my lack of experience with circuit boards I guess

I'm debating on getting an FMU temporarily until I can get the MS working, but both won't be for a while yet lol