My n/a super b3 build

[drumnerd33]

It will pull that high but pointless... he built the cam so it was still streetable and dont have to go rev crazy to have power.

[drumnerd33]

well matt said he built my cam so i didnt have to wrap it out for all my power... and a while back he said i should shift around 5700 so i think he was pretty damn close, im thinking around 5500 and that will put my next gear right in the good torque also. But i think part of my prob is right before my o2 went out... it was showing lean when i opened the second barrel, so i think i need to go up a jet on the secondary.

[bhazard]

Re: My n/a super b3 build

All that fancy headwork and valve train and you're only revving to 6k? I figured it'd pull to at least 7500.

[gergorian]

Sounds good man! It does seem like it might be laking a little bit up high, which with a good carb tune should take care of. ( or switch to EFI )

[drumnerd33]

Here is an acceleration video, i took it to redline @ 6000 each shift im thinking im prob better off shifting around 5500, also still waiting on my o2 sensor so still havent been able to dial in the carb yet. Took it up to 65 mph kinda hard to see the numbers.

http://youtu.be/wDqFVeYlr5w

[drumnerd33]

Will do it tomorrow.

[gergorian]

NICE. Really need a vid of you taking it to redline. I want to hear that thing sing!

[drumnerd33]

Well got my 500 miles done.... been taking it to redline here and there, this thing runs awesome. Still have some tuning on the carb to do but my 02 sensor died so have one on order, once its in can continue tuning and then find a dyno to get it on.

[drumnerd33]

Re: My n/a super b3 build

Will have to do a video in the next few days

Sent from my LG-LS970 using Tapatalk 2

[Prafeston]

No video of how it sounds now with the resonator?

Love that shift knob. Very sporty looking!

[drumnerd33]

Me too... im working on it, tomorrow morning gonna open up the idle jet and see if i can dial it in, then im gonna be driving it everyday to get the 500 miles over with.

[blkfordsedan]

Break that thing in, tune it and put that bad boy on a dyno! Lets see what ya got for your money and effort! This will be the first member built B3 with Matt's head and a roller cam. I wanna see what kind of torque curve that cam lays down!

[gergorian]

Haha, that's awesome.

[drumnerd33]

yeah i let my buddy drive it so i could see how loud the exhaust was on a drive by, he was blown away by how much power it had.banana time

[gergorian]

Oh OK thanks! Also, its good to see that the car is coming along well.