Looks like a perfect excuse to come down to AZ for a rust free shell. (yeah, I know it'll probably pop out, but I figured I'd throw that out there). By the way, I'm in Maine right now, driving my moms 3 around, so I'm in the same cold sloppy situation as the rest of you northerners. lol. At least mom drives a 6 speed manual and doesn't mind me driving it with the handbrake.
Announcement
Collapse
No announcement yet.
My 91 AWD protege
Collapse
X
-
Last edited by Advancedynamix; 12-21-2013, 01:53 PM.Driving for me is neither a right nor a privilege. Driving is my passion, as it was for the people who invented the automobile, the people who paved the first roads and the people who continue to improve the automobile. Please respect this passion.
-
Lmao Charlie.... The body on this one is actually pretty clean considering it's an original Canadian car, somebody has definately taken very good care of it over the years
But if this one completely rots out on me, I wouldn't complain if you found me a perfect AZ shell to work with
1988 323 Station Wagon - KLG4 swapped
1988 323 GT - B6T Powered
2008 Ford Escape - Rollover Survivor
1990 Festiva - First Ever Completed KLZE swap (SOLD)
If no one from the future stops you from doing it, how bad of a decision can it really be?
Comment
-
I'll start looking for a suitable replacement.Driving for me is neither a right nor a privilege. Driving is my passion, as it was for the people who invented the automobile, the people who paved the first roads and the people who continue to improve the automobile. Please respect this passion.
Comment
-
Monday I heard a bang noise, then lots of driving resistance, then it cleared up... I instantly thought something in the tranny blew but it still drove so I kept going.... But it made a loud bad bearing noise... But I kept driving it all week anyway lol
Today on the way to work, the tranny finally blew apart and left me sitting on the side of the road
Called my girlfriend to come get me and we towed it home, glad I had a chain with me lol
Got a GTX trans out and ready to go
Wheel off
Drained the fluid.... Looks nasty
Axles out
I think it's a great time to install the brand new drivers axle I've had kickin around
Then one crossmember off
That's all for tonight... More tomorrow
1988 323 Station Wagon - KLG4 swapped
1988 323 GT - B6T Powered
2008 Ford Escape - Rollover Survivor
1990 Festiva - First Ever Completed KLZE swap (SOLD)
If no one from the future stops you from doing it, how bad of a decision can it really be?
Comment
-
So last night we got dumped on like crazy with snow so I had to clear the driveway before I could start on the car... 90% of this snow fell overnight
So first I started up top un-hooking the mount, shift cables, electrical etc
Then I went underneath to unbolt the driveshaft.... I definitely found where the tranny blew lol
Check out the play on the output flange
Then down goes the driveshaft
Then I unbolted the second crossmember
Hooked up the cherry picker to lower both the engine and trans.... Almost necessary to give clearance to pull the trans off the engine
Unbolted the trans and dropped it out... After a bit of fighting, pushing, prying and swearing
Then after some more swearing prying and perseverance I got the GTX trans bolted to engine and the upper mounts back on to get the cherry picker out of the way
Thats how far I got so far, I'm on a supper break and might do more yet tonight
1988 323 Station Wagon - KLG4 swapped
1988 323 GT - B6T Powered
2008 Ford Escape - Rollover Survivor
1990 Festiva - First Ever Completed KLZE swap (SOLD)
If no one from the future stops you from doing it, how bad of a decision can it really be?
Comment
-
I decided not to work on it anymore tonight, figured relax a little bit lol I'll finish it off tomorrow
1988 323 Station Wagon - KLG4 swapped
1988 323 GT - B6T Powered
2008 Ford Escape - Rollover Survivor
1990 Festiva - First Ever Completed KLZE swap (SOLD)
If no one from the future stops you from doing it, how bad of a decision can it really be?
Comment
-
Alternator changed.... The old one was weak and the light would dim at idle with the heater on... Would have been a royal pain if the axle was in lol
I love the extra space with the GTX trans, it's sooo much nicer accessing the starter without a diff lock motor in the way lol
Driveshaft back on
Axles in
Just needs tranny fluid, crossmembers, the rad, battery and whatever little stuff left to hook up and it'll be ready for start up hopefully tonight after supper once I get my feet warmed up and get some feeling back in them lol
1988 323 Station Wagon - KLG4 swapped
1988 323 GT - B6T Powered
2008 Ford Escape - Rollover Survivor
1990 Festiva - First Ever Completed KLZE swap (SOLD)
If no one from the future stops you from doing it, how bad of a decision can it really be?
Comment
-
Gotta eat sometimes lol plus my feet hurt from being so cold lol
1988 323 Station Wagon - KLG4 swapped
1988 323 GT - B6T Powered
2008 Ford Escape - Rollover Survivor
1990 Festiva - First Ever Completed KLZE swap (SOLD)
If no one from the future stops you from doing it, how bad of a decision can it really be?
Comment
-
Aaaannnndddd it runs and moves under its own power again
But test drive is gunna wait tomorrow though
1988 323 Station Wagon - KLG4 swapped
1988 323 GT - B6T Powered
2008 Ford Escape - Rollover Survivor
1990 Festiva - First Ever Completed KLZE swap (SOLD)
If no one from the future stops you from doing it, how bad of a decision can it really be?
Comment
-
The bolts weren't rusty, just dirty and covered in road salt, they just look worse then they really are lol
1988 323 Station Wagon - KLG4 swapped
1988 323 GT - B6T Powered
2008 Ford Escape - Rollover Survivor
1990 Festiva - First Ever Completed KLZE swap (SOLD)
If no one from the future stops you from doing it, how bad of a decision can it really be?
Comment
-
Yup and they're all coming back off again this weekend
Here's how my test drive went today
Drive down the road, get 10 mins from home, start slowing down and the rear tires locked up solid..... ANOTHER dead tranny
The transfer portion of the tranny seized up stopping the driveshaft from turning... I had to pull the driveshaft on the side of the damn road so I could tow the ********** thing home
I'm pissed
1988 323 Station Wagon - KLG4 swapped
1988 323 GT - B6T Powered
2008 Ford Escape - Rollover Survivor
1990 Festiva - First Ever Completed KLZE swap (SOLD)
If no one from the future stops you from doing it, how bad of a decision can it really be?
Comment
Comment