Chris's Lifted BP swap

[Micro Mudder]

have put my build on hold cuz its hard to get parts with out transportation soo I bought a motorcycle so I I can go buy pparts makes sence to me haha but ill buy every thang next week including a welder to make motor mount, eeexhoust and all the other odds and ends

BUT I had an idea for the cold air intake, I'm going to put a real hood scoop on , reason because I'm going the have the huge cold air intake center of the motor facing the frount with a 3 way pvc valve the main goes to the throttle body. Then the throttle boddy and the other secondary I can have it directed to the inside of the car through the opening on the ppassenger side above the shock towerr so it won't. Flood the motor when I go through water sry if it don't quite make sence ill get it built and ill post it but I lade out the pvc pipe and it looks sick but to build it its like $100 not to bad for a ajustible 2 way air intake

[Movin]

If its like one of my old baja's they do about 1-2 mph across a lake...with sand tires but don't open the door!

[Micro Mudder]

Well I'm back! Been bizzy with navy and working. But bought and sold a car and bike which now funds my build. I have been looking for an ecm from an escort gt and no luck,going to look around junkyards in kc tomorrow still not shure if that's the only thang I need to get it running cuz it starts with festiva ecm with starting fluid but just bairly runs, also getting a welder to finish my motor mount and cradle mount, getting custom exhoust next week ANY IDEAS? But after that I should be able to take it for a spin around the block cross my fingers so I can take it to the exhoust shop Tuesday

And I'm just wondering there any one know someone in kc that's done a bp swap just incase I have missed somthing and have someone with expearance help out?

[zoom zoom]

Dude your grammar is so bad it hurts to read your posts, I think I read something about needing an Ecu? If you figure out you need a bp09 and figure out the letter on the VAF you need to go with it message me, I have both.

I said if *you* figure it out because I can't remember if bp09 is actually the one you need.

[Micro Mudder]

Yea sorry about the grammer my only weakness in school was english but I will but can't check till I get the ecu hope I find one soon

[Micro Mudder]

Well no one can afford it so he he so I can get this week So I just going to order one on ebay and hope for the best the right one

[zoom zoom]

I have no idea what you just said but you should do a little research and figure out which Ecu and VAF comes on a stock Bp and message me. I already know what you need, it took a whole 10-15 minutes of searching, and I'm 95% sure I have what you need but you gotta help yourself out before I'm gonna help you. Hell if you can't afford the price of shipping from me to you you can't afford to pay ebay prices either.

[Micro Mudder]

Yea should have rechecked the voice to text that last post was way off ment to say none of the junkyards had a escort gt but price isn't a problem but the ecu pretty shure I need the bptc or there others that would work? I'm going off matt swabs bp swap guide pdf. File I have the vaf form the same year of motor code is bp05

[Micro Mudder]

Well I removed the engine, cleaned the engine bay, redid the radiator hoses, welded a frount crossmember brase, new radiator mounts, moved the firewall back more, moved the break line splitter thang, reinstalled the motor and hooked it up this weekend went to crank it over and turned over great... but forgot to put the festy ecu back on till I get my bp09 ecu, but when I put it on my starter gear inguage mechnasim broke.... so only thang I broke on the buld was the clutch cable and starter lol but ill post some pics but its just a bp swap so nothin you haven't seen before

[Micro Mudder]

My phone won't let me post pics so here http://s1285.photobucket.com/albums/a595/xbigcx94
And thanks to every one who has helped

[Micro Mudder]

Well today I. Put on the passanger motor mount, the 5" lift on the front, got a new battory, ordered a new starter will be here tomorrow, put on a new glasspack and reconnected the shifting linkage all with out jacking up the car! oh and the final piece of the puzle the ecu thanks to matt but will have the first start up tomorrow when I get the starter so ill film this moment in history!

[zoom zoom]

Actually man you can thank bravekozak, the Ecu came from him.

[Micro Mudder]

Ahhh okay well thanks to bravekozak! Well would add more pics but they won't up load but to all the nonbeleavers that lifting a festy is better then slammin to the ground but today wasn't able to get the starter go figuer but getting it early tomorrow if my ride doesn't bale lol 2013-11-06_16-46-54_105.jpg

[Micro Mudder]

Got my starter and what do you know.... it only is getting fuel to the passenger side of the motor the hose connected to the fuel filter the other hose on the drivers side connected to something else down there by the filter is getting no fuel do I have them backwards?

[kingstonpygmies]

Double check your inertia switch and power to it. I just put a fuel pump in mine. Winter coming on makes for a lot of repairs. New pump on eBay was 35 shipped

Sent from Kingston Ga from my hillbilly handheld