Tweet
I already have missed a day of work cause of this tomorrow ill move the radiator out of the way an cut an access hole but I needed to see if this is the prob an not the axles
-
Frankie
fully custom 88 festy (project doomsday) Febuary in 2012 calander
Blockspire: ken block replica aspire
AdvancedDynamix: "If you put the same kind of effort into your engine that you put into the rest of the car, well... it'll be epic". thanks man
http://www.facebook.com/#!/profile.p...00000110128487 -
I'm still afraid to drive is I work 20 min from work all highway so it needs to be perfectFrankie
fully custom 88 festy (project doomsday) Febuary in 2012 calander
Blockspire: ken block replica aspire
AdvancedDynamix: "If you put the same kind of effort into your engine that you put into the rest of the car, well... it'll be epic". thanks man
http://www.facebook.com/#!/profile.p...00000110128487Comment
-
"Perfection" I'm not so sure is going to be achieved...but I once heard a man say "failure is always an option!"97 Aspire w/K03 turbocharged b6 SOHC
CoolingMist Varicool II Meth injection
Phantom gripped and cryo'ed 5 speed
Comment
-
Mythbusters FTW!Originally posted by iceracerdude View Post
I didn't cut from up top, but rather I cut from the front facing side of the support. Easier that way.
Test drive for another win!Contact me for information about Festiva Madness!
Remember, FestYboy is inflatable , and Scitzz means crazy, YO!
"Like I'm going to suggest we do the job right." ~Fecomatter May 28 2016.Comment
-
During this processFrankie
fully custom 88 festy (project doomsday) Febuary in 2012 calander
Blockspire: ken block replica aspire
AdvancedDynamix: "If you put the same kind of effort into your engine that you put into the rest of the car, well... it'll be epic". thanks man
http://www.facebook.com/#!/profile.p...00000110128487Comment
-
frank Whats wrong with that sweet festy of yoursReD 91 L FIRSTiva
92 silver 5spd with some boost! KratosComment
-
Why do you have so much stuff removed???1989 Carby L: Stock. Slow.
1998 Mustang Cobra: ported heads, cams, longtubes, 4.30 gears
2016 Focus ST: daily driven go-kartComment
-
That sweet festy was supposed to go to madness but wasn't done an time and as for the stuff removed I couldn't get the axle out so I tried moving everything out of the way it still didn't seem to workFrankie
fully custom 88 festy (project doomsday) Febuary in 2012 calander
Blockspire: ken block replica aspire
AdvancedDynamix: "If you put the same kind of effort into your engine that you put into the rest of the car, well... it'll be epic". thanks man
http://www.facebook.com/#!/profile.p...00000110128487Comment
-
Ok quick update: cut out the broken bolt an nut an installed new nuts an bolt so everything is tight.
Started the car an drove down the street much better but still bouncy. Chrisofna said I could have pulled the cv axle apart an one of the ends might have falled out in the boot.... anything else I should check.
Side note... it has new knuckles,starter,clutch, release bearing an I have a clutch cable on the wayFrankie
fully custom 88 festy (project doomsday) Febuary in 2012 calander
Blockspire: ken block replica aspire
AdvancedDynamix: "If you put the same kind of effort into your engine that you put into the rest of the car, well... it'll be epic". thanks man
http://www.facebook.com/#!/profile.p...00000110128487Comment
-
Didn't put the clutch disk in backwards did you?2008 Kia Rio- new beater
1987 F-150- revived and CLEAN!!!
1987 Suzuki Dual Sport- fun beater bike
1993 Festiva- Fiona, DD
1997 Aspire- Peaspire, Refurb'd, sold
1997 Aspire- Babyspire, DD
1994 Aspire - Project Kiazord
1994 Aspire- Crustyspire, RIP
"If it moves, grease it, if it don't, paint it, and if it ain't broke don't fix it!"Comment
-
I don't think you can put one in backwards...Famous Last Words: "How hard can it be?"Comment
-
Spoken like a guy with a screen name like...well, you see the irony here right?Originally posted by juryrigger007 View Post97 Aspire w/K03 turbocharged b6 SOHC
CoolingMist Varicool II Meth injection
Phantom gripped and cryo'ed 5 speed
Comment
-
So icy have you ever expierenced this befor in yours I have the 97 four door I'm almost 90 0percent sure I broke an axle somehowOriginally posted by iceracerdude View PostFrankie
fully custom 88 festy (project doomsday) Febuary in 2012 calander
Blockspire: ken block replica aspire
AdvancedDynamix: "If you put the same kind of effort into your engine that you put into the rest of the car, well... it'll be epic". thanks man
http://www.facebook.com/#!/profile.p...00000110128487Comment
-
So cut the boot band and see what happened...the inner cv will pull out, the outter cv is tricky to get apart...or break, unless it wears out over time.2008 Kia Rio- new beater
1987 F-150- revived and CLEAN!!!
1987 Suzuki Dual Sport- fun beater bike
1993 Festiva- Fiona, DD
1997 Aspire- Peaspire, Refurb'd, sold
1997 Aspire- Babyspire, DD
1994 Aspire - Project Kiazord
1994 Aspire- Crustyspire, RIP
"If it moves, grease it, if it don't, paint it, and if it ain't broke don't fix it!"Comment
-
It really can be the only thing I can think of the engine has no problem befor the clutch an the trans mission is good too. I can get it up to about 35 befor it starts bad an at idle it doesn't bounce. It also goes into gear real well so I'm pretty sure I did it right. The only real problem I had was getting the axles out I yanked at it an think I broke somethin in the bootFrankie
fully custom 88 festy (project doomsday) Febuary in 2012 calander
Blockspire: ken block replica aspire
AdvancedDynamix: "If you put the same kind of effort into your engine that you put into the rest of the car, well... it'll be epic". thanks man
http://www.facebook.com/#!/profile.p...00000110128487Comment
Comment