Tweet
looks like a tuning nightmare to me!
-
-
Im slowly getting things done since its finally warming up!BP Festiva on MS2 with gsxr itbs Woot!!!Comment
-
Oh snap!
-Scott
Aqua 93 L
Razor Red 09 F-150 XLT
White 06 Ford Escape XLTComment
-
Mike, AKA the sasquatch
1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...Comment
-
drool
:cheers:Any difference that makes no difference is no difference.
Old Blue- New Tricks
91 Festiva FSM PDF - DropboxComment
-
is the car running on MS right now or are you putting it in the same time as the itb's?
Mike, AKA the sasquatch
1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...Comment
-
Right now the car is in a shop at the family farm 2 1/2 hours away waiting for the snow to go away. The ms has a base map for a n/a bp or turbo bp on it already.BP Festiva on MS2 with gsxr itbs Woot!!!Comment
-
be aware of vaccum leaks! it took a buddy of mine and me a longggg time to figure out why his fe3 miata was running so poorly on home-made ITB's.
are you going to make this into a race car
Comment
-
Lol no race car I think it will just be a real fun rip around town car but I did take it to a auto x last year and had fun.BP Festiva on MS2 with gsxr itbs Woot!!!Comment
-
Well i got more of my parts in and plan to pick up the car tomorrow from the farm.
BP Festiva on MS2 with gsxr itbs Woot!!!Comment
-
Very impressive... love watching this build thread, for sure! Hard to believe you got all that squeezing between the head and the firewall, though!1988 Chevy Sprint Turbo 997ccComment
-
Well I have a bit more than 11 inches to work with and this is a bit over 10 so I may have to get creative and shorten the stacks #$@!BP Festiva on MS2 with gsxr itbs Woot!!!Comment
-
Ouch. IIRC, those aren't cheap either. The stacks, I mean.
Sweet looking though.Any difference that makes no difference is no difference.
Old Blue- New Tricks
91 Festiva FSM PDF - DropboxComment
-
drool
one more option you have is to get some little air filters from a gsxr or somthing... from what i remember they have little velocity stacks inside the filter...
Mike, AKA the sasquatch
1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...Comment
-
OR you could chop off the horn and weld in 45* mandrel bends... this will allow you to keep the stacks AND provide more torque by having a longer runner.Trees aren't kind to me...
currently: 2 88Ls (Scrappy and Jersey), 88LX, 90L(Pepe), 91L, 91GL (Skippy) 93 GL Sport (the Mighty Favakk), 94 (Bruce) & 95 Aspire SEs, 97 Aspire (The Joker),
94 Justy 4WD, 87 Fiero GT, plus 2 parts cars. That's my fleet.
Comment
Comment