My KLZE Festiva Build Thread

[Damkid]

^^turbo'd of course lol

This is just because Im excited and realized this piping was used with the turbo I already have so I had to put it together to get more hyped lol

[hofficergrover]

I just seen this on cp.com lol was on their and seen was about to ask why not on here lol.

[ford4life]

omfg get cracking!

[Damkid]

Well I've thought about it and a 5psi setup is about max for the stock electronics, and for cost reasons and being impatient, I'm going FMU and keep the millennia intake, and no intercooler, this will only be temporary just so I can have boost again, later I'll keep upgrading everything and add the intercooler later

Doing this will allow me to have my car turbo'd within a month

[hofficergrover]

Yes that awesome!

[Damkid]

I'm not even close to being done, i'm just hungry and came in from the garage for some supper and a break from working on the car :lol:

Anyway here's the start of the front pipe



Just barely enough room for this pipe to squeeze between the rad and block, but it fits which is all that matters



The start of the rear pipe



I'm keeping the rear pipe as close as possible to the block in order to give as much room as possible for the outlet pipe coming off the turbo to leave the engine bay, it'll be a very tight squeeze, but thats what i get for turbo'ing this thing :evil4:



This is roughly where the turbo will sit, the 2 pipes will join together right at the turbo

[PhoenixSHO]

If you need mendrel bends , Theres a shop on ebay (in ON) that has a very wide variety of exhaust pipings at real low prices. Thats where I order all my piping needs.

http://stores.ebay.com/exhaustdirectperformance

[Damkid]

^^Thanks for the link, although i think i have enough pipes to finish it up, i just barely had enough of the 2" :lol:

Here's more pics..... i just need to fully weld it now since i've only tack welded everything together just in case i needed to make changes, but after that, the inlet side of it is finished

Oh and i threw on my lower parts of my custom intake just for the hell of it

[hofficergrover]

Looks awesome!!!!

[Damkid]

Thanks Tony

[hofficergrover]

Your welcome, Now get back out their and finish this thing so can come down and give me a ride! lol

[Zanzer]

This car is gonna be filled with so much WIN :thumbleft:

[Gomez]

I think it will be fast enough to peel the rust off the downpipes LOL

Wiiiiinniiiiiiing

[Christ]

Are you going to brace that turbo at all?

I want to put a remote mount on my golf, but I'm afraid of stress on the pipe and turbo flange.

[Grey Vw]

Doing it!