Announcement

Collapse
No announcement yet.

What have you done to your Festiva today!?

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • On a different note... we put the motor back in, sending our guy to get some fab work done on the front end to strengthen the lower front beam and the engine forks with some 1/4" steel or something, not sure what his plan is honestly...


    Car #789
    Sponsors: Williams American Construction, Dewaynes Tire service, Roofing Supply Group
    1992 Festiva L - BP Swapped, Aspire Swapped, Rally America Sanctioned.
    1993 Festiva GL - 4sp Automatic and the bluest car i've ever seen...
    http://www.facebook.com/warally

    Comment


    • Well it was yesterday. But the people at Tire Discounters were a bunch of boneheads. Though I really shouldn't be saying much, they did do it for free.

      Sometime over the weekend I had picked up a nail in my driver's side front tire, well I decided to go to Tire Discounters on the way home from work yesterday to get it fixed. They saw I worked for Autozone and they order parts from Autozone commercially, so they did it for free which was extremely nice. I waited about an hour or so, then they beckoned me to the garage, first to tell me my car is unsafe because the lug bolts are only holding on by 5 or 6 threads (The thread in the hub are only about 5 or 6 threads deep, if that.)
      Then said it is like that because I had spacers on my aftermarket wheels (I don't have spacers), I told them there are no spacers, all I have are hub rings, and he told me "Same thing" I was like "no, they sit in a recessed part of the wheel, they don't space anything." He didn't believe me. Then tried to overrule what I said by telling me the part of the brake rotor was a wheel spacer. I told him, "no that is the brake rotor."

      Ok, the main reason he brought me into the garage was to say the lug bolt has stripped and was rounded off, and they couldn't get the wheel off to patch the tire. So I went home, and pulled out my 9/16th 12 point socket, and a breaker bar, and took it off with no effort at all. I basically took it back to tire discounters and told them in a polite way that they were dummies and didn't bother to try another socket to take the lug bolt out, the idiot tech and all the other techs that were crowed around my car instead of working on the other cars there, all believed this stupidity that they were telling me about my car, and nobody thought to tell the guy working on my car to use another damn socket on his impact gun.

      I'm glad I got it done for free, and I really appreciate that they did it. But then to accuse me of making my car unsafe, and then being too dumb to try another socket to get the lug bolt off. I am glad I didn't pay any money, I would be friggin' furious if I paid the regular $25 asking price to patch a tire.
      1991 Ford Festiva BP (Full Aspire/Rio Swap) (337k Miles) (Around 95k Engine)
      2002 Chevy Cavalier LS Sport 2.2L DOHC Ecotec (Threw a Rod)
      1998 Chevy Monte Carlo LS 3.1 V6 (225k miles) Best MPG = 28

      Comment


      • I've had similar experiences with other tire shops. My standard policy now is to put the spare on, drop off the tire and wheel on my way to work, and then pick it up on my way home. I absolutely refuse to wait for those clowns to figure out some thing that is common sense.

        Comment


        • Finally got my engine build and install finished and took it racing. Engine survived, and I won race 1 each day! But Saturday I broke a front axle cv joint in race 3 and Sunday the rear axle beam snapped in half in race 2. A friend welded it back together and I won race 3, which made up for a lot of the frustration.
          Thricetiva replaced Icetiva as the new ride
          Icetiva-3-race-car-build
          http://www.cardomain.com/ride/2533299

          Comment


          • Originally posted by Icedawg View Post
            Finally got my engine build and install finished and took it racing. Engine survived, and I won race 1 each day! But Saturday I broke a front axle cv joint in race 3 and Sunday the rear axle beam snapped in half in race 2. A friend welded it back together and I won race 3, which made up for a lot of the frustration.
            Nice glad to hear I can't wait to take my Festi to the track one day.

            Sent from my HUAWEI H892L using Tapatalk
            88 Ford Festiva LX "Miogi" B8-ME swapped.

            93 Ford Festiva L "Haywire" Rat infested trashcan WIP

            Comment


            • Bought a turbo for the festiva and adapter for the fuel rail to install an adjustable fuel pressure regulator

              Sent from my HUAWEI H892L using Tapatalk
              88 Ford Festiva LX "Miogi" B8-ME swapped.

              93 Ford Festiva L "Haywire" Rat infested trashcan WIP

              Comment




              • Put a rack on it, upgraded to PAL fuses, other misc things

                Comment




                • Just need to find a spray can of pop yellow to touch up.

                  Spoiler, rear coil overs, cut springs in front to level

                  Sent from my SM-N910T using Tapatalk
                  Yellow - '91 Festiva L - 5 speed

                  Comment




                  • Re-covered the door panels.

                    Sent from my SM-N910T using Tapatalk
                    Yellow - '91 Festiva L - 5 speed

                    Comment


                    • Torque', I can only agree with your assessment of Tire Discounters as I was told that they cant do an alignment on my Explorer because I switched to polyurithane bushings and have LT235/85R16s. For anyone reading - Don't Go To Tire Discounters

                      Comment


                      • Shadow has been sitting for about a month needing a master cylinder & brake booster, which I have ordered, also it needed an exhaust manifold & down pipe. Being that Shadow is from the Cleveland area, the manifold and down pipe were rotted bad where they meet and was leaking exhaust bad. I already had the manifold but ordered the down pipe from here.
                        I was able to reuse the oxygen sensor by taking my old manifold to my welder guy and he got it out in 10 minutes. I had him take out the other oxygen sensor, which was no good, out of the replacement manifold. Amazing what high heat can do when you know how to use it.
                        I got the manifold, oxygen sensor, and down pipe on, just waiting for the master cylinder/booster.
                        1993 Ford Festiva L blue 170,000 miles
                        1990 Ford Festiva L Plus white 190,000 Auto, currently waiting to have another engine put in.
                        1995 Ford F150 XLT black 203,000 miles
                        2002 Honda CRV silver 180,000 miles
                        2003 Toyota Rav4 Sport black 94,000 miles
                        2008 Sym Rv250 dark grey 30,000 miles. My scooter.
                        1989 Ford Festiva LX black 233,000 miles. Sold to my better half's son.

                        Mike

                        Comment


                        • I BROUGHT IT HOME!
                          ~For one thing. $650.oo (USD) cash

                          I have the battery on charge on a ten amp cycle, but I doubt it's any good. It was fully discharged.

                          I also did a short and dirty engine bay cleanup. I don't trust engine cleaners on anything made out of rubber.

                          I gave the rest of the car a quick bath, since it was under pine trees. I'll go farther later.

                          TODAY IS MY VICTORY DAY! I just GOT IT - and that for me right now is enough.

                          I HAVE GOT IT! It's MINE now....

                          I don't know how to explain what that means, I was looking in this direction for many years.



                          ~ But I'm guessin' ya feel me
                          Last edited by Greywolf; 03-19-2016, 05:50 PM.
                          Most people don't drive what they want at all, and never will

                          Comment


                          • Originally posted by Greywolf View Post
                            I BROUGHT IT HOME!
                            ~For one thing. $650.oo (USD) cash

                            I have the battery on charge on a ten amp cycle, but I doubt it's any good. It was fully discharged.

                            I also did a short and dirty engine bay cleanup. I don't trust engine cleaners on anything made out of rubber.

                            I gave the rest of the car a quick bath, since it was under pine trees. I'll go farther later.

                            TODAY IS MY VICTORY DAY! I just GOT IT - and that for me right now is enough.

                            I HAVE GOT IT! It's MINE now....

                            I don't know how to explain what that means, I was looking in this direction for many years.



                            ~ But I'm guessin' ya feel me
                            Great to hear... now we need a description and pictures. You will find about everything you need to know about your Festiva here.

                            Comment


                            • It's been a long while since I've worked on or been around a Festiva. Sold mine 3 years ago. This one is dad's and has had it since 98 with 80k. Now has 254k and about toast. Going to replace the brake cylinder and shoes one the passenger side, repack and on the way home. Don't see put anything more into it. Still runs great and drives okay and averages 40+!

                              91 rusty Festiva 260k

                              Comment


                              • Wow. That is the reason my Festiva sits on big Douglas fir blocks every winter.
                                Soon it will be time to come down. I can feel it.
                                Last edited by bravekozak; 03-29-2016, 06:14 PM.

                                Comment

                                Working...
                                X