What have you done to your Festiva today!?

[link5186]

Turn signal/marker light mod. :thumbright:

Sent from the bathroom via crapatalk

[All systemz]

Three things I did over the weekend.
1. Replaced the front struts... night and day difference.
2. replaced the PCV... no more oil burning smell.
3. Replaced all four tires.

[Damkid]

Oh man, nobody likes my Chrysler orange vx wheels? I spent a lot of time stripping and powder coating those. Lol They are still my daily wheels, the 16"s are just for fun and racing.
And I do not have power steering, but I do have rio strut bearings. It's not easy to turn but I can muscle it around.


Sent from my iPhone using Tapatalk

Those vx rims are my absolute least favorite style of rims, no matter what color they are, no offense though

[walth]

really? I thought the Pinto was a horse....never knew they blew up when hit from behind.
Also not sure why you would build a study bench. I just sit at the table or on the couch to study.

not "study" but "stuRdy" lol

I'm adding you to FB so you can see my new bench hahaha

[rollertoaster]

I had that same tire on my old 300zx, i was always happy with those BFG's..... although mine were 205/30/20's and about $400 each :shock:

And BTW, the rims are WWWAAAAYYYYYYY better then those old ones

Oh man, nobody likes my Chrysler orange vx wheels? I spent a lot of time stripping and powder coating those. Lol They are still my daily wheels, the 16"s are just for fun and racing.
And I do not have power steering, but I do have rio strut bearings. It's not easy to turn but I can muscle it around.


Sent from my iPhone using Tapatalk

[Damkid]

I had that same tire on my old 300zx, i was always happy with those BFG's..... although mine were 205/30/20's and about $400 each :shock:

And BTW, the rims are WWWAAAAYYYYYYY better then those old ones

[Oren09]

Made more progress on Izzystiva today. Replaced busted coolant hose and rotted vacuum hose. Fuel pump from junkyard car didn't work, so I swapped the old fuel pump into the junkyard car's pump module and now have working pump AND sender.
Interior is all back together. Only things remaining there are ignition switch and lock, wiper module, horn switch. Bumper painting is.. eh. Front one is coming out well and is ready for clear coating. Rear bumper needs to be sanded. Paint is flaking off with all the previous layers. Grille as well.
Headlights need aiming. 4x more shifter bushings coming for the transmission end of the shaft.
Tomorrow: rear end teardown. Noisy bearing, especially over 60MPH. Hopefully its a rear one. Parking brake holds car but does not stop car or lock wheels.

[Christ]

Making mental notes about the little issues:

Pulls to the right under moderate braking, trends to lock right rear (thinking prop valve)

Aspire engine swap needs attention... Occasional sputter/stall, no restart for several minutes. Still had spark, but floods fuel while cranking.

Want to see if MK2 golf suspension will fit easily enough.

Exhaust leaks in a couple places.

RPM hangs between shifts sometimes, doesn't cut fuel on decel right away. Takes 2-10 seconds for full decel.

[200KGPGTP]

Im picking these wheels up on Friday. They will be my auto-x setup. 205-40-16 BFG g-force kdw on 16" wheels. My fenders are slightly rolled and I couldn't get them to rub on my short test drive.








Sent from my iPhone using Tapatalk

God, how do you turn that thing!? Does it have power steering?

[Ford Fester]

Fixed my gtx. It was running rough when I bought it and would not boost at all. Thought maybe it had a bad megasquirt tune. Turned out that the vacuum line to the ecm was not hooked up. Win! Craigslist I love you.

[GenevaDirt]

the pinto had that problem too didn't it?

yesterday and today I built a very nice and sturdy bench for so far 70 dollars. I'll post a pic when I'm further along with it and I get the garage a little more organized. making room to continue rebuilding my early gen b6 and working on the gray festiva I have and am changing from auto to manual

really? I thought the Pinto was a horse....never knew they blew up when hit from behind.
Also not sure why you would build a study bench. I just sit at the table or on the couch to study.

[walth]

the pinto had that problem too didn't it?

yesterday and today I built a very nice and sturdy bench for so far 70 dollars. I'll post a pic when I'm further along with it and I get the garage a little more organized. making room to continue rebuilding my early gen b6 and working on the gray festiva I have and am changing from auto to manual

[GenevaDirt]

PRONTO!

ahhhh...the Ford Pronto, I love the station wagon version with the small little round windows in the back. I even liked the fast back version with the gas tank right up against the bumper that were known to catch on fire when hit from behind. The memories.....thanks...

[walth]

PRONTO!

[neanderpaul]

ASAP!