What have you done to your Festiva today!?

[Advancedynamix]

So, I haven't been driving Rosie, my 93 auto, because she needs some work (VC gasket, Axles, suspension stuff and other odds and ends) but I went out to start her up and she fired like I just got back from the grocery store. Its been 4 months since I started this car. Gotta love em.

[bravekozak]

http://www.ebay.com/itm/SNAP-ON-1-2-DRIVE-FLEX-HEAD-TORQUE-WRENCH-TQFR250-50-250-FT-LB-w-CASE-/161017139723?pt=Motors_Automotive_Tools&hash=item257d5e920b&vxp=mtr#ht_385wt_958

[TorqueEffect]

My ebrake works perfectly now. Woo!!!!
Had the car since last August, and hasn't had a properly working ebrake since, and probably long before I even obtained it.

Was test driving it around the neighborhood, didn't think it would work all that well, I yanked the ebrake doing almost 30, and my passenger wheel locked up making a terrible tire squeal. Just need new brake shoes all around, instead of having mismatched set with different wear on each shoe, this is probably why my driver's side didn't lock up as well, they were not in the best shape.

God I need another job. lol

Also I will buy someone a couple six packs of beer, and pay for their gas if they will come down and do my valve stem seals.
I really don't want to tackle this myself. Because first off, I don't have a torque wrench to be reattaching rocker arms.

[200KGPGTP]

WOO!

[Prafeston]

P.S. I will be in KC this weekend.

[200KGPGTP]

The EGT TB is indeed for this project. I suppose I am also waiting on that, but I have a lot to do before I start worrying about that, haha

[Prafeston]

Buck, do you have other projects going on? Why do you need the EGT TB?

[200KGPGTP]

Engine is READY to drop in! Found/placed all the bolts today, got all the rest of the brackets on, etc. Now just waiting on some rack bellows and I can do that, as well as the inner and outer tie rod ends, put the sway bar on(Also waiting on last minute sway bar plates from the powdercoater) then away I go with engine installation! I can see the finish line!

[TorqueEffect]

Fiddled with the brake slave cylinder, it was leaking again, but after removing the the drum, everything was dry. ???

It wasn't coming from the brake line either. Odd.

But after resetting the auto-adjuster, and put it all back together, my handbrake works perfectly on that side now, now I just need the otherside to do the same. Will fiddle with that tomorrow.

Also does anyone want to replace my valve stem seals for me?
I really don't feel comfortable enough doing it myself, and a garage would probably just pull the head, and charge me for the extra labor, and I can't afford that.

I am already down about a quart of oil on only 600 miles. But that is also to blame on the valve cover gasket, but I planned on getting that done when the valve stem seals got replaced.

[sc72]

Bought pedal pads from Bravekozak, got them in the mail today and installed them right away, this is cheep security for my ankle bones. Thanks Brave.

[Team Lightning]

yea but the lug nuts are all to big i need tiny ones.

You can get them at Autozone. They are about 32.00 inc the tool to remove them. (they inc enough for a 5 lug car)

[WeDefyU]

I'm gonna have to do that corner light to blinker mod!

I bought aftermarket walmart stop/tail/turn lights, robbed the sockets out, and did a little splicing/soldering/jbwelding, and done.

[Oren09]

I bought mine on Amazon. The nut kit is "tuner" style. Each nut is keyed and requires a special socket. I got deep ones to fit long studs in case I have to use spacers with aftermarket wheels. The nut kit was about $25. It was for 5 lug cars so I have four spares.

[Prafeston]

I'm gonna have to do that corner light to blinker mod!

[Festevil3]

[ATTACH=CONFIG]12299[/ATTACH][ATTACH=CONFIG]12300[/ATTACH][ATTACH=CONFIG]12301[/ATTACH]

Turned my park lights into park/turn lights, installed fog lights in turn signal holes and cut two coils from all the springs.

I like the graphics kit, even though it is upside down