Covered up the wires I had to run to the ECU with that plastic flex shielding to make the engine bay a little more presentable, topped up the radiator, and put the fender back into place.
Might do some more before the day is out.
Announcement
Collapse
No announcement yet.
What have you done to your Festiva today!?
Collapse
This is a sticky topic.
X
X
-
The mighty raw 1.8l Mazda roar
Sent from my HUAWEI H892L using Tapatalk
Leave a comment:
-
BP is up and running!
Still needs a bit of work to button it all up, but it runs and drives. But very loud since it is minus an exhaust.
Leave a comment:
-
Well I found out today that the 1996 BP downpipe will not bolt up to the 1992 BP Manifold. =/
Originally posted by shadetree View Post^ if you have a parts Festiva , the firewall solo has the same plug for the BP iac . I think it's the vent solo .
Leave a comment:
-
Originally posted by TorqueEffect View PostWell the IAC connector that both rockauto and autozone lists for a 1992 Escort GT will not fit the IAC on the 1992 Escort BP.
I then lookup 1996 Escort GT, and find what looks like the correct connector.
*sigh*
Sent from my HUAWEI H892L using Tapatalk
Leave a comment:
-
Originally posted by shadetree View Post^ if you have a parts Festiva , the firewall solo has the same plug for the BP iac . I think it's the vent solo .
Since I deleted the purge valve and charcoal canister, the plug got tucked into the fender. So i'll take a look. I did have a spare festiva harness, but all the plugs that looked like they possibly could fit, didn't.
I'll report back whether it is the same plug or not.
Leave a comment:
-
^ if you have a parts Festiva , the firewall solo has the same plug for the BP iac . I think it's the vent solo .
Leave a comment:
-
Well the IAC connector that both rockauto and autozone lists for a 1992 Escort GT will not fit the IAC on the 1992 Escort BP.
I then lookup 1996 Escort GT, and find what looks like the correct connector.
*sigh*
Leave a comment:
-
20160429_205251.jpg
Switched out a broken Headlight and painted the assemblies as well as switching out the yellow marker light with an amber one.
20160507_203839.jpg
Painted the Grill and Bumper. (Looking at these close up I should have spent more time prepping each, specially the bumper.)
20160428_072923.jpg
20160507_214343.jpg
Also Painted the Wiper Arms and started putting a Mirror on the passenger side. Is there a special inside plate for the non powered mirrors on the passenger side because the mirror I have doesn't have one so I'm just modifying the old one to make it work.
Leave a comment:
-
Originally posted by TorqueEffect View Post
Sent from my HUAWEI H892L using Tapatalk
Leave a comment:
-
-
Going to be receiving my BP and getting started on swapping it in.
Sent from my LG-D800 using Tapatalk
Leave a comment:
-
Originally posted by firebush357 View PostFirst time playing with Bondo... Lets just say it is going to take some practice and the correct tools
[ATTACH=CONFIG]19595[/ATTACH]
Leave a comment:
-
First time playing with Bondo... Lets just say it is going to take some practice and the correct tools
20160505_192147.jpg
Leave a comment:
-
yeah, I wasn't able to sand it by hand, I needed power tools to do so, which is why it took so long for me to get around to it. lol :p
Leave a comment:
Leave a comment: