What have you done to your Festiva today!?

[TorqueEffect]

Ok whoever on here said that the Aspire intake tube fits a Festiva is a liar. The VAF hole is far too big for the Aspire tube, but the other end fit just fine.

Unless post-OBD2 ones have a different intake tube, then that would explain it because this is off a 97 Aspire.

So po'd, ran out of time at the junkyard, had the Aspire beam all disconnected, except I couldn't figure out how to undo the e-brake cable, and before I could figure it out, they closed the yard and I had to leave.

I did snag a Aspire Chilton manual from inside the car, was a bit wet but still in good shape. Chilton >>> Haynes

Chilton why u no do Festiva manual?

[200KGPGTP]

3 weeks and 1 day until I can buy a Festiva. Sick of delivering in the truck.

[scitzz]

Not a single darn thing. Because I don't have one anymore. But I'm working on changing that. :toothy7:

There is a FS thread on here, guy from Raleigh selling one for $600.

[TorqueEffect]

Might get myself some Rio brakes tomorrow.

What sized socket is needed for the axle nut? I am betting bigger than any socket I have. =/

[navdoc101]

Good beer.
Brewery's about 6 blocks from my house.
Makes the grinding better.

[M3NTAL]

Grinded the rivets off the old diff/ring gear tonight

[1990new]

Right marker light wasn't working on Trixie and neither marker light was working on Bessie.
Trixie has a burned out bulb but neither of the bulbs were burned out on Bessie.

Replaced the bulb in Trixie and cleaned the bulb holders on Bessie. Now they all work nicely.

[batstiva]

Not a single darn thing. Because I don't have one anymore. But I'm working on changing that. :toothy7:

[ColdFlame53]

Did my tie rod end the other day now I need to do the inner haha

[TorqueEffect]

Found a set of 4, new in box Iridium NGKs at a thrift store for $5. They don't fit the B3 or B6, but I found they fit in the Ford and Mazda BPs (Kia BPs didn't show up on the application list)

Since I am buying a BP off shadetree, I figured I would pick them up seeing as a new set of these from a parts store would be about $30, granted I probably would have just bought coppers anyway.

[scitzz]

Installing an Mfactory

Suhwheeeet

Running around outside the asylum again with my tappy talky appy

[M3NTAL]

Installing an Mfactory

[1990new]

Installed power mirrors on Bessie. All three of my Festies have power mirrors now and I will be posting some manual mirrors for sale soon.
http://s1222.photobucket.com/user/1990new/slideshow/Power%20Mirrors%20install%20on%20Bessie

[sactnato]

Got the number?
Are these the same bushing referenced in another thread?

Yes they have been mentioned before in various threads. The part number is ATM 0771303.

[Pu241]

Changed the oil and shifter bushings. I bought all the bushings (10) the local NAPA had since they also fit my Capri.

Got the number?
Are these the same bushing referenced in another thread?