What have you done to your Festiva today!?

[jamesmc]

Installed the horn from a Crown Vic / Grand Marquis. Tons better than the stock one. Good bye bicycle horn!

[1990new]

I removed the rack and pinion (lasted 250,000 miles) from JunkYard Save and mailed it off to be rebuilt. Was not that hard to remove but I sure dread the job of putting it back in. (I did not remove the steering column and I hope I can get it back it without removing it.)

[89newb]

I replaced the fuseable links with cartridge fuses. Running 20a, 30a, 20a

[freshtiva]

. I didn't leave anyone anything worth a thing on that car

Thats a proper part out, good job !!

[fooddaman]

Pulled of the rear bumper. Cleaned it up and got rid of all the dirt and crap in it. Primed it and realized I didn't have enough white paint left so I painted it flat black for now, until I buy some more white paint from work. It actually looks good black but I think I'll still paint it white.

The black does look good!

[hamburglar]

Hopefully got all my parts lined up (I know i forgot some)
I did do a coolant flush on my SHO

[200KGPGTP]

Can you easily pick up any part of it?

[Oren09]

That's rusty!

[neanderpaul]

Now that is thorough!

[kartracer46]

Kartracer, that's an almost completely naked Festiva! (I still see suspension though)

The front struts were so rusty they fell out when I jacked up the front end, the upper mounts are gone. The struts were blown out, the back ones were welded where they broke the bolts off. The rear beam was even rusty, I did manage to save a nice ebrake cable. The front knuckles are rusty and the dust shields have fallen off, bearings and rotors were toast. the heads for the rotors are round. I didn't leave anyone anything worth a thing on that car. I may pull the rear adjusters for someone here that needed one and the front calipers for cores tomorrow morning.

[Oren09]

Kartracer, that's an almost completely naked Festiva! (I still see suspension though)

[kartracer46]

Finished stripping today, I took a day off yesterday because I was sick. But the weather was nice today so I finished it all up and got the engine and trans mounted in the silver 92GL. Not a bad day overall.

http://

[walth]

looks good

[Charlie1717]

Pulled of the rear bumper. Cleaned it up and got rid of all the dirt and crap in it. Primed it and realized I didn't have enough white paint left so I painted it flat black for now, until I buy some more white paint from work. It actually looks good black but I think I'll still paint it white.

[Oren09]

It may be an anti-rust coat?

I have a 71 F250 with a reddish primer/undercoating for rust prevention that is visible in places the paint has worn off.