What have you done to your Festiva today!?

[link5186]

^^ Nice! Looking good. Just got back from my first run. Puts on power nice and smooth. Pulling hills a gear higher. Idles like a champ! Kinda seems to slug a bit in the upper mid-range, but I am running the b3 ecm.

Sent from the bathroom via crapatalk

[Charlie1717]

Way to go man!^^^

Today I got a little farther on my rear hatch floor. It's coming along well! I mounted the amp under the floor, it's hanging from the top. Then the sub is sitting on the wood flooring that is slightly raised from the floor.
I got some carpet like material from joanne fabrics- 10 yards for like 7 bucks! It was on sale. I bought some spray adhesive to spray on the wood (haven't done yet) I also need to pick up some staples for my stapler to staple the carpet as well.
So far it looks great, works well and has helped the sound quality of the sub!

[link5186]

IMG_20110810_212622 by link5186, on Flickr

Finished that up! Just ignore all the extra hoses, they'll go away when I get some actual plugs.

More pics and story coming to the build thread tomorrow

[zoom zoom]

,Got my new lca/sway bar bushings in, can't wait to get off work n play with some polyurethane! MOK9737 ftw!

[rakfint]

Tried out some DIY Cooper S style decals

[M3NTAL]

Fit her in my garage



Tinted out my car

[rollertoaster]

How'd you do?

I didn't even look at the standings. I normally run in stu class with my 2010 wrx. I really only raced it as a crowd pleaser, it's real use is going to be for rallyx. I'm stuck in street mod due to my ghetto aero kit, and gutted interior. I'm only running cheapo tires, and really only did it for fun. The car did great though, considering it's about 2-3" too high and the alignment was totally screwed up.

Today I took a few steps toward fixing the alignment. I'm running camber bolts maxed out negative, I still had positive camber so I slotted the holes on my strut tops and slid them in as far as they would go. Got me -.5 right and -.25 left camber. It's still need to be more negative but that will fall into place when I get the car lower. Adjusted the toe which we just eyeballed the other day when I finished my aspire swap. It was out by nearly a degree of positive total toe. I also need to get some shims for the rear as it has excessive toe in. I can imagine how much faster I'd have been with my alignment fixed yesterday.


---
- Sent from my iPhone using Tapatalk

[ericsmith32]

Festiva nothing as usual. It isn't my problem child unlike the Aspire. Finally got the 2nd o2 sensor out so I hung it on the firewall and put a old o2 sensor in it's place. CEL hasn't popped up in 40 miles so hoping it's gone for a while. That cat sure is a stinkin' when you get on should replace it but don't care to. Runs alot better at least. Also fixed the ABS light.. took of the the bulb that was easy! Fixed the windshield washer nozzle and put a new gas cap on. Hopefully that'll fix the gas smell.

[200KGPGTP]

---
- Sent from my iPhone using Tapatalk

Don't flip it!

[Flyin4stroke]

I bet it pulls alot nicer^^

[ENEMY_]

Yea, FMS. It is actually a little to low for my liking. I guess that means fender roll or flares

[neanderpaul]

---
- Sent from my iPhone using Tapatalk

How'd you do?

[deviantsource]

Pulled out my old front door speakers, installed a new head unit and a pair of 6.5" Pioneers in the rear.

Old speakers needed to go! (actual pic of passenger door!)

[rollertoaster]

---
- Sent from my iPhone using Tapatalk

[Gomez]

Ha ha Looks good ole buddy. Can't remember what you used. FMS?