Announcement

Collapse
No announcement yet.

What have you done to your Festiva today!?

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Huli
    replied
    Re: What have you done to your Festiva today!?

    Put? N new tail lights and replaced the gasket with low temp rubber.uploadfromtaptalk1358645884870.jpguploadfromtaptalk1358645894888.jpg

    Leave a comment:


  • greywolf200
    replied
    Installed KYB shocks and Kia strut mounts, as they say, it's just like adding power steering

    Leave a comment:


  • ericsmith32
    replied
    What have you done to your Festiva today!?

    Had a small miss I've noticed lately. Pulled the disty cap and rotor and cleaned both with sand paper. Much smoother now. Checked the trans and nothing! Didn't realize it was leaking or maybe I was just checking it with the engine off.

    Also adjusted the spark plug gap on the Focus and bypassed the dpfe sensor. That seems to cured its cutting out also. Must of been my day for working on cars!

    Leave a comment:


  • bravekozak
    replied
    TheresGabe, you might consider getting a rally II shift knob to match your body stripe.

    Greywolf, milling the soap base of a grease varies from one to three hours. It is checked on a grind gauge, just like paint. I haven't seen a Moly grease that was milled. Another great test is to feel a dab of grease in between your thumb and forefinger, to check for any gritty particles of stearate from the soap base. Maybe you can ask your mechanic if you can see how he packs your bearings next time. Tell him you are curious to see how its done and buy him a cup of coffee.
    All the best.
    Last edited by bravekozak; 01-19-2013, 10:00 AM.

    Leave a comment:


  • greywolf200
    replied
    Originally posted by bravekozak View Post
    Packing the wheel bearings properly with high quality grease is vital to longevity.
    Thanks for all the great information brave. I always preferred packing my bearings myself, but a spinal cord injury has curtailed some of the things I can do. Your explanations gave me more things to wonder about. I always cleaned bearings prior to repacking, but don't know if my mechanic did and of course if you're getting paid by the job, a mechanical packer is the quick way to go. I was surprised about your comment about Moly grease, I was under the impression Moly was an excellent lubricant. I guess it all depends on the application.

    Thanks again,

    Leave a comment:


  • gergorian
    replied
    Nice! I really like your car. What did you use for the stripe? vinyl or is it painted on?

    Leave a comment:


  • TheresGabe
    replied
    After taking the picture I posted in the other post with the Spark on my lunch, I looked at the picture and realized how dirty my little car was. So, even though it was only 13 degrees, at least my car is clean.

    Leave a comment:


  • TorqueEffect
    replied
    Originally posted by TheresGabe View Post
    First time I've bought my festy something new in a month or two... Just ordered this!
    I have been thinking of getting one like that, depending on my tax refund, I may get one. Except I think I will go for this one.

    Last edited by TorqueEffect; 01-18-2013, 10:59 PM.

    Leave a comment:


  • Huli
    replied
    Re: What have you done to your Festiva today!?

    Thanks Driver1... I could not wait. My festy is currently my daily driver so had to go the $$ route. Did find out it was the wrong alternator and the battery was too small.

    So now, at least I have the correct parts :thumbup:

    Leave a comment:


  • DriverOne
    replied
    Re: What have you done to your Festiva today!?

    Huli, there's a guy close by me who could repair your alternator at a great rate. He's been in the business for years.
    Last edited by DriverOne; 01-18-2013, 07:38 PM.

    Leave a comment:


  • Huli
    replied
    Re: What have you done to your Festiva today!?

    Yesterday:
    The voltage regulator went out.... hooray! Of course it was over voltage so new battery too!

    Today:
    Picking up alternator that was special order, and probably new battery.

    Festiva fact:
    NOS alternator from Ford costs $689 and there are only two left in the country. Ford guy didn't hang up on me, even after a full two minutes of laughing!

    Leave a comment:


  • DriverOne
    replied
    Re: What have you done to your Festiva today!?

    God, it's cold this morning! Last night it rained and then froze. I was greeted this morning by a popfesty. I ended up using cold hose water to get the door to open. Eesh! Class...

    Leave a comment:


  • ckiesman
    replied
    Originally posted by Huli View Post
    Replaced front crank seal. One oil leak down!!! Took 3 hours including cleanup, not too painful.
    not to bad of a job is it? lol. I though it would take way longer than necessary. About all I did on mine today was took off the sun visors and cleaned them really well in the house. Im impressed with how good they look.

    Leave a comment:


  • Oren09
    replied
    Aqua passed inspection and I got it registered. It's legal now!

    Leave a comment:


  • TheresGabe
    replied
    First time I've bought my festy something new in a month or two... Just ordered this!

    Leave a comment:

Working...
X