Announcement

Collapse
No announcement yet.

What have you done to your Festiva today!?

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • kellen302
    replied
    you could try one of these http://www.streetperformance.com/par...-kv160105.html or a turndown for a more "finished" look also, Ill probably add a side dump with a e cutout for my swap, glad to see that the geometry works, nice job

    Leave a comment:


  • FeistyFesti
    replied
    Took pics of my side exit exhaust, pretty loud so I will install another Glass Pack behind the 25 inch long one to help reduce the loudness. It does pull a lot harder than before with seat of the pants dyno.





    Leave a comment:


  • ENEMY_
    replied
    Paint the interior Panels

    Leave a comment:


  • SuperDaveGulvak
    replied
    Ended up ordering a set of 12" Yokohama from TireRack.com for the rear of my Festy to get me off the doughnut. Next check comes the front set & mounting & balancing Oh also got my deerhead mudflap girl decals on rear windowes yesterday........RedNeck sexy!

    Leave a comment:


  • zoom zoom
    replied
    Yea well that's what I've been telling my old lady.. she doesn't want to set aside funds for me to get jackstands, I've been nagging her for the last 8 months about it. I've got 2 hydraulic jacks but one loses pressure like you say yours does, the other is just wore out completely, bother duralast jacks from azone, 3-5 years old, they probably just need lube but I don't trust them because they do lose pressure. As much as I'm under our vehicles I hope she got my point today about the jackstands. Thankfully, I had the tires blocked, and it kept it from straight rolling on top of me in a heartbeat. Maybe now she understands why I constantly yell at her boys when they get near me while I'm working on a suspended vehicle. I don't have any cinder blocks or stumps or anything in my tiny yard to use either, trust me I've been trying to get something for awhile now, granted it never was top priority.

    She was actually in the garage port about 20 feet away and came screaming at me asking if I was ok when she heard it hit the ground.

    Really, there's no one to blame but myself, I shouldn't mess with it unless it's "secure" but at the same time I have to do what I HAVE to do, and I don't have the $ to pay someone else to do it.
    Last edited by zoom zoom; 08-17-2011, 02:55 AM.

    Leave a comment:


  • Oren09
    replied
    Originally posted by Zanzer View Post
    ^^ Always use jack stands just in case

    I don't trust any jack, hydraulic or mechanical, and stands are good insurance. It only takes one "aww crap!" moment to mess you up.
    Yep. Jacks are only meant for lifting.
    I have a 3 ton floor jack and it ticks and drops in height a tiny unmeasurable amount every couple of seconds just from the weight of a Festiva.
    I will not get under a car if it's not supported by jack stands.


    Oh, and I put a little oil in the Festy and drove it.
    I've been driving my truck all weekend...

    Leave a comment:


  • Zanzer
    replied
    ^^ Always use jack stands just in case

    I don't trust any jack, hydraulic or mechanical, and stands are good insurance. It only takes one "aww crap!" moment to mess you up.

    Leave a comment:


  • zoom zoom
    replied
    Mine failed, the metal at the pivot point is cracked on one side, made it start to lean..and slowly but surely hit the pavement.

    I should sue dodge for putting out such low quality shit, its for my mini van! But then they'd counter its not made for my car blah blah.. I'd think a jack made for a minivan's weight would me more than sufficient to hold up the front/driver side of an aspire.

    Leave a comment:


  • 91_festy_Gl
    replied
    Originally posted by zoom zoom View Post
    Replaced the driver side LCA..almost got smashed in the process..the jack failed hard.
    Funny, the same thing happened to me today too. My jack sank into the soft ground because of the rain yesterday.

    Leave a comment:


  • zoom zoom
    replied
    Replaced the driver side LCA..almost got smashed in the process..the jack failed hard.

    Leave a comment:


  • Advancedynamix
    replied
    Originally posted by Charlie1717 View Post
    More info please Looks good! What is it from? Did it just clip to the speaker grill?
    If I recall correctly those screw on with 2 or three screws. You can get them at a lot of places, I got the one I had in my Toyota pickup at a truckstop along the interstate, but I have seen them at autoparts stores and even walmart. It folds up all nice when your not using it, really a nice sturdy little holder, but you can't fit big drinks in it.

    Leave a comment:


  • neanderpaul
    replied
    Picked up a brush guard for my dad's f-150 for his birthday present. Dad will be 79.

    Leave a comment:


  • neanderpaul
    replied
    Hauled a festiva with my festiva. The following is a video. Click it!

    Leave a comment:


  • Ford Fester
    replied
    Installed my new bra....fits so nice..

    Leave a comment:


  • Charlie1717
    replied
    Originally posted by rakfint View Post
    Added a cup holder for my lady.



    More info please Looks good! What is it from? Did it just clip to the speaker grill?

    Leave a comment:

Working...
X